Issue |
J. Eur. Opt. Soc.-Rapid Publ.
Volume 5, 2010
|
|
---|---|---|
Article Number | 10053 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.2971/jeos.2010.10053 | |
Published online | 23 September 2010 |
Regular papers
Investigations on a robust profile model for the reconstruction of 2D periodic absorber lines in scatterometry
1
Physikalisch-Technische Bundesanstalt (PTB), Braunschweig and Berlin, Germany
2
AMTC GmbH Co.KG, Dresden, Germany
3
Weierstrass Institute for Applied Analysis and Stochastics, Berlin, Germany
Received:
5
July
2010
Scatterometry as a non-imaging indirect optical method in wafer metrology is applicable to lithography masks designed for extreme ultraviolet (EUV) lithography, where light with wavelengths of about 13.5 nm is applied. The main goal is to reconstruct the critical dimensions (CD) of the mask, i.e., profile parameters such as line width, line height, and side-wall angle, from the measured diffracted light pattern and to estimate the associated uncertainties. The numerical simulation of the diffraction process for periodic 2D structures can be realized by the finite element solution of the two-dimensional Helmholtz equation. The inverse problem is expressed as a non-linear operator equation where the operator maps the sought mask parameters to the efficiencies of the diffracted plane wave modes. To solve this operator equation, the deviation of the measured efficiencies from the ones obtained computationally is minimized by a Gauß-Newton type iterative method. In the present paper, the admissibility of rectangular profile models for the evaluations of CD uniformity is studied. More precisely, several sets of typical measurement data are simulated for trapezoidal shaped EUV masks with different mask signatures characterized by various line widths, heights and side-wall angles slightly smaller than 90°. Using these sets, but assuming rectangular structures as the basic profiles of the numerical reconstruction algorithm, approximate line height and width parameters are determined as the critical dimensions of the mask. Finally, the model error due to the simplified shapes is analyzed by checking the deviations of the reconstructed parameters from their nominal values.
Key words: scatterometry / profile model / critical dimensions (CD) / inverse problem
© The Author(s) 2010. All rights reserved.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.