Issue |
J. Eur. Opt. Society-Rapid Publ.
Volume 19, Number 2, 2023
|
|
---|---|---|
Article Number | 44 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/jeos/2023042 | |
Published online | 07 December 2023 |
Research Article
Three-dimensional temperature field measurement method based on light field colorimetric thermometry
School of Optoelectronic Engineering, Xidian University, Xi’an, Shaanxi 710071, China
* Corresponding author: yuanying@xidian.edu.cn
Received:
4
October
2023
Accepted:
10
November
2023
This paper proposes a novel method for three-dimensional (3D) temperature measurement using light field colorimetric thermometry, aiming to overcome the challenges associated with the intricate system structure and the limited availability of 3D information in traditional radiation temperature measurement methods. Firstly, the correlation between corresponding image points and the positions of 3D object in the light field image system is analyzed using the ray tracing method. The 3D position acquisition model and the light field colorimetric thermometry model are established, enabling simultaneous acquisition of the spatial coordinates and radiometric information of the 3D object. Then, the light field camera radiation calibration experiment was conducted, and the 3D temperature field will be obtained by employing colorimetric thermometry for each corresponding image point of the same object point. Finally, the experiment employed a light field camera for temperature measurement and reconstruction of candle flames. The accuracy of the temperature measurement is 3.31%, thus confirming the feasibility and effectiveness of the proposed method.
Key words: Temperature measurement / Optical field imaging / Colorimetric thermometry / 3D reconstruction / Radiometric calibration
© The Author(s), published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.