Issue |
J. Eur. Opt. Soc.-Rapid Publ.
Volume 8, 2013
|
|
---|---|---|
Article Number | 13073 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.2971/jeos.2013.13073 | |
Published online | 29 October 2013 |
Regular papers
A direct comparison between a MEMS deformable mirror and a liquid crystal spatial light modulator in signal-based wavefront sensing
Advanced Optical Imaging Group, School of Physics, University College Dublin, Dublin 4, Ireland
* md.atikur.jewel@ucdconnect.ie
Received:
24
September
2013
Accepted:
11
October
2013
Aberrations degrade the performance of optical systems in terms of resolution and signal-to-noise ratio. This work explores the feasibility of a signal-based wavefront sensor, which employs a search algorithm to estimate Zernike coefficients of given aberrations. The search algorithm was supported by Gaussian interpolation. The performance of two different reflective wavefront correctors, a deformable mirror and a spatial light modulator in signal-based wavefront sensing, was compared under identical conditions. The aberrations were introduced by using another identical high resolution reflecting spatial light modulator. The performance was quantified using the Strehl ratio, which was estimated from simultaneously acquired Hartmann-Shack measurements of Zernike coefficients. We find that the spatial light modulator can be a good alternative to the deformable mirror in terms of dynamic range and sensitivity, when speed is not a limiting factor. Distinct advantages of the spatial light modulator are high number of pixels and a larger active area.
Key words: Wavefront sensing / adaptive optics / aberration compensation / deformable mirror / spatial light modulator
© The Author(s) 2013. All rights reserved.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.