Open Access
Issue |
J. Eur. Opt. Soc.-Rapid Publ.
Volume 11, 2016
|
|
---|---|---|
Article Number | 16010 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/jeos.2016.16010 | |
Published online | 06 February 2016 |
- G. Yu, H. Li, and D. Walker, “Removal of Mid Spatial-Frequency Features in Mirror Segments,” J. Eur. Opt. Soc.-Rapid 6, 11044, 2011 [NASA ADS] [CrossRef] [Google Scholar]
- J. DeGroote, B. Light, B. Savage, B. Wiederhold, and M. Mandina, “VIBE™ finishing to remove mid-spatial frequency ripple,” OSA Publishing 2010, OWE2 (2010). [Google Scholar]
- Y. F. Dai, F. Shi, X. Q. Peng, and S. Y. Li, “Restraint of mid-spatial frequency error in magneto-rheological finishing (MRF) process by maximum entropy method,” Sci. China Ser. E 52, 3092–3097 (2009). [NASA ADS] [CrossRef] [Google Scholar]
- R. Boerret, J. Burger, A. Bich, C. Gall, and T. Hellmuth, “Research on fabrication of aspheres at the Center of Optics Technology (University of Applied Science in Aalen),” Proc. SPIE TD03, 20–23 (2005). [Google Scholar]
- C. Vogt, H. Adelsberger, F. Schneider, T. Koller, S. Draxinger, S. Sinzinger, R. Rascher, et al., “Dwell time assisted grinding,” in Proceedings of 2nd EOS Conference on Manufacturing of Optical Components (EOSMOC 2011), (EOS, München, 2011). [Google Scholar]
- C. Vogt, R. Rascher, J. Mazal, R. Börret, R.-D. Lohner, and T. Tawakoli, “The cause of structures on ground shapes,” in Proceedings of 3rd EOS Conference on Manufacturing of Optical Components (EOSMOC 2013), (EOS, München, 2013). [Google Scholar]
- C. Heinzel, D. Grimme, and A. Moisan, “Modeling of Surface Generation in Contour Grinding of Optical Molds”, in CIRP Annals - Manufacturing Technology 55(1), 581–584 (2006). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.