Open Access
Issue |
J. Eur. Opt. Soc.-Rapid Publ.
Volume 5, 2010
|
|
---|---|---|
Article Number | 10026 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.2971/jeos.2010.10026 | |
Published online | 01 June 2010 |
- I. Weingärtner, and M. Schulz, “Novel scanning technique for ultraprecise measurement of slope and topography of flats, spheres and aspheres and complex surfaces” Proc. SPIE 3739, 274–282 (1999). [CrossRef] [Google Scholar]
- I. Weingärtner, M. Schulz, and C. Elster, “Novel scanning technique for ultra-precise measurement of topography” Proc. SPIE 3782, 306–317 (1999). [CrossRef] [Google Scholar]
- C. Elster, and I. Weingärtner, “Solution to the shearing problem” Appl. Opt. 38, 5024–5031 (1999). [NASA ADS] [CrossRef] [Google Scholar]
- R. Geckeler, and I. Weingärtner, “Sub-nm topography measurement by deflectometry: Flatness standard and wafer nanotopography” Proc. SPIE 4779, 1–12 (2002). [NASA ADS] [CrossRef] [Google Scholar]
- G. Ehret, M. Schulz, M. Stavridis, and C. Elster, “A new flatness reference measurement system based on deflectometry and difference deflectometry” in Fringe 2009: 6th International Workshop on Advanced Optical Metrology, W. Osten, M. Kujawinska, eds., 318–323 (Springer-Verlag, Berlin, 2009). [Google Scholar]
- G. Ehret, M. Schulz, M. Baier, and A. Fitzenreiter, “A new optical flatness reference measurement system” Proc. DGaO 110, P22 (2009). [Google Scholar]
- M. Schulz, G. Ehret, M. Stavridis, and C. Elster, “Concept, design and capability analysis of the new deflectometric flatness reference at PTB” Nucl. Instrum. Meth. A 616, 134–139 (2010). [Google Scholar]
- F. Siewert, T. Noll, T. Schlegel, T. Zeschke, and H. Lammert, “The nanometer optical component measuring machine: a new sub-nm topography measuring device for x-ray optics at BESSY” Proc. AIP 705, 847–850 (2004). [NASA ADS] [CrossRef] [Google Scholar]
- H. Lammert, T. Noll, T. Schlegel, F. Siewert, and T. Zeschke, “Optisches Messverfahren und Präzisionsmessmaschine zur Ermittlung von Idealformabweichungen technisch polierter Oberflächen” Patent No. DE 103 03 659 (2005). [Google Scholar]
- F. Siewert, H. Lammert, and T. Zeschke, “The nanometer optical component measuring machine” in Modern Developments in X-Ray and Neutron Optics, A. Erko, M. Idir, T. Krist, A. G. Michette, eds., 193–200 (Springer-Verlag, Berlin, 2008). [CrossRef] [Google Scholar]
- S. G. Alcock, K. J. S. Sawhney, S. Scott, U. Pedersen, R. Walton, F. Siewert, T. Zeschke, F. Senf, T. Noll, and H. Lammert, “The Diamond-NOM: A non-contact profiler capable of characterizing optical figure error with sub-nanometre repeatability” Nucl. Instrum. Meth. A 616, 224–228 (2009). [Google Scholar]
- P. Z. Takacs, S. Qian, and J. Colbert, “Design of a long-trace surface profiler” Proc. SPIE 749, 59–64 (1987). [NASA ADS] [CrossRef] [Google Scholar]
- S. Qian, P. Z. Takacs, and W. Jark, “The penta-prism LTP: A long-trace-profiler with stationary optical head and moving penta prisma” Rev. Sci. Instrum. 66, 2562–2569 (1995). [NASA ADS] [CrossRef] [Google Scholar]
- R. D. Geckeler, and A. Just, “Distance-dependent influences on angle metrology with autocollimators in deflectometry” Proc. SPIE 7077, 70770B (2008). [NASA ADS] [Google Scholar]
- F. Siewert, J. Buchheim, and T. Zeschke, “Characterization and calibration of 2nd generation slope measuring profiler” Nucl. Instrum. Meth. A 616, 119–127 (2010). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.