Open Access
Issue
J. Eur. Opt. Soc.-Rapid Publ.
Volume 11, 2016
Article Number 16008
Number of page(s) 5
DOI https://doi.org/10.2971/jeos.2016.16008
Published online 06 February 2016
  1. S. Engelhardt, “Direct Laser Writing,” in Laser Technology in Biomimetics, V. Schmidt, and M. R. Belegratis, eds., 13–56 (Springer-Verlag, Berlin/Heidelberg, 2013). [CrossRef] [Google Scholar]
  2. M. Roehrig, M. Thiel, M. Worgull, and H. Hölscher, “3D Direct Laser Writing of Nano- and Microstructured Hierarchical Gecko- Mimicking Surfaces,” Small 8(19), 3009–3015 (2012). [CrossRef] [Google Scholar]
  3. W. Barthlott, T. Schimmel, S. Wiersch, K. Koch, M. Brede, M. Barczewski , S. Walheim, et al., “The Salvinia Paradox: Superhydrophobic Surfaces with Hydrophilic Pins for Air Retention Under Water,” Adv. Mater. 22 (21), 2325–2328 (2010). [NASA ADS] [CrossRef] [Google Scholar]
  4. T. Bueckmann, N. Stenger, M. Kadic, J. Kaschke, A. Frölich, T. Kennerknecht, C. Eberl, et al., “Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography,” Adv. Mater. 24(20), 2710–2714 (2012). [NASA ADS] [CrossRef] [Google Scholar]
  5. L. Yuan, M. L. Ng, and P. R. Herman, “Femtosecond laser writing of phase-tuned volume gratings for symmetry control in 3D photonic crystal holographic lithography,” Optical Materials Express 5(3), 515–529 (2015). [NASA ADS] [CrossRef] [Google Scholar]
  6. T. Ergin, N. Stenger, P. Brenner, J. Pendry, and M. Wegener, “Three- Dimensional Invisibility Cloak at Optical Wavelengths,” Science 328, 337–339 (2010). [NASA ADS] [CrossRef] [Google Scholar]
  7. B. Richter, T. Pauloehrl, J. Kaschke, D. Fichtner, J. Fischer, A. M. Greiner, D. Wedlich, et al, “Three-Dimensional Microscaffolds Exhibiting Spatially Resolved Surface Chemistry,” Adv. Mater. 25(42), 6117–6122 (2013). [NASA ADS] [CrossRef] [Google Scholar]
  8. M. Infusino, A. De Luca, A. Veltri, A. Veltri, C. Vazquez-Vazquez, M. A. Correa-Duarte, R. Dhama, et al., “Loss-Mitigated Collective Resonances in Gain-Assisted Plasmonic Mesocapsules,” ACS Photonics 1(4), 371–376 (2014). [CrossRef] [Google Scholar]
  9. K. Kaneko, H. B. Sun, X. M. Duan, and S. Kawata, “Two-photon photoreduction of metallic nanoparticle gratings in a polymer matrix,” Appl. Phys. Lett. 83(7), 1426–1428 (2003). [NASA ADS] [CrossRef] [Google Scholar]
  10. R. Kuladeep, L. Jyothi, S. Chakradhar, and D. N. Rao, “Fabrication of metal nanostructures in a polymer matrix using femtosecond laser writing technique,” Opt. Eng. 53(7), 071823 (2014). [NASA ADS] [CrossRef] [Google Scholar]
  11. M. Sakamoto, M. Fujistuka, and T. Majima, “Light as a construction tool of metal nanoparticles: Synthesis and mechanism,” J. Photoch. Photobio. C 10, 33–56 (2009). [CrossRef] [Google Scholar]
  12. W. M. Huang, and J. L. Shi, “Synthesis and properties of ZrO(2) films dispersed with Au nanoparticles,” J. Sol-Gel Sci. Techn. 20, 145–151 (2001). [CrossRef] [Google Scholar]
  13. R. Zanella, and C. Louis, “Influence of the conditions of thermal treatments and of storage on the size of the gold particles in Au/TiO2 samples,” Catal. Today 107(8), 768–777 (2005). [CrossRef] [Google Scholar]
  14. M. I. A. Umar, C. C. Yap, R. Awang, A. A. Umar, M. M. Salleh, and M. Yahaya, “Formation of gold-coated multilayer graphene via thermal reduction,” Mater. Lett. 106, 200–203 (2013). [CrossRef] [Google Scholar]
  15. S. Passinger, Two-Photon Polymerization and Application to Surface Plasmon Polaritons (Cuvillier Verlag, Göttingen, 2008). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.