Open Access
Issue
J. Eur. Opt. Soc.-Rapid Publ.
Volume 11, 2016
Article Number 16005
Number of page(s) 7
DOI https://doi.org/10.2971/jeos.2016.16005
Published online 06 February 2016
  1. R. Gilmozzi, and J. Spyromilio, “The European Extremely Large Telescope (E-ELT),” The Messenger 127, 11–19 (2007). [NASA ADS] [Google Scholar]
  2. A. Swat, “ESO Prototype segment specification,” E-SPE-ESO-300- 0150 4, 1–33 (2009). [Google Scholar]
  3. J. E. Nelson, and T. S. Mast, “Construction of the Keck Observatory,” Proc. SPIE 1236, 47–55 (1990). [NASA ADS] [CrossRef] [Google Scholar]
  4. D. Walker, I. Baker, R. Evans, S. Hamidi, P. Harris, H. Li, W. Messelink, et al., “Technologies for producing segments for extremely large telescopes,” Proc. SPIE 8126, 893360 (2011). [Google Scholar]
  5. C. Gray, I. Baker, G. Davies, R. Evans, N. Field, T. Fox-Leonard, W. Messelink, et al., “Fast manufacturing of E-ELT mirror segments using CNC polishing,” Proc. SPIE 8838, 2023475 (2013). [Google Scholar]
  6. P. Comley, P. Morantz, P. Shore, and X. Tonnellier, “Grinding metre-scale mirror segments for the E-ELT ground based telescope,” CIRP Ann-Manuf. Techn. 60, 379–382 (2011). [CrossRef] [Google Scholar]
  7. M. Cayrel, “Specification for the supply by OpTIC of prototype segments of the E-ELT primary mirror,” E-SPE-ESO-300-0150 5, 1–36 (2013). [Google Scholar]
  8. H. Chen, W. Sheng, N. Xi, M. Song, and Y. Chen, “Automated robot trajectory planning for spray painting of free-form surfaces in automotive manufacturing,” Proceedings to the IEEE International Conference on Robotics and Automation, 450–455 (IEEE, Washington DC, 2002). [Google Scholar]
  9. C. W. King, and M. Bibby, “Development of a metrology workstation for full-aperture and sub-aperture stitching measurements,” Procedia CIRP 13, 359–364 (2014). [CrossRef] [Google Scholar]
  10. M. Bibby, and C. W. King, “Development of an on-machine 3D texture analyser,” Adv. Mat. Res. 579, 338–347 (2012). [Google Scholar]
  11. D. Walker, G. Yu, H. Li, W. Messelink, R. Evans, and A. Beaucamp, “Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surface,” Opt. Express 20, 19787–19798 (2012). [CrossRef] [Google Scholar]
  12. M. R. Driels, Lt W. Swayze, and Lt S. Potter, “Full-pose calibration of a robot manipulator using a coordinate measuring machine,” Int. J. Adv. Manuf. Tech. 8, 34–41 (1993). [CrossRef] [Google Scholar]
  13. J. Ji, L. Sun, and L. Yu, “A new pose measuring and kinematics calibrating method for manipulators,” in Proceedings to the 2007 IEEE International Conference on Robotics and Automation, 4925–4930 (IEEE, Roma, 2007). [Google Scholar]
  14. H. Alzarok, S. Fletcher, A. P. Longstaff, and A. Myers, “Assessment of the positioning accuracy of a small articulated robot during machining operations,” in Proceedings to the Computing and Engineering Annual Researchers’ Conference 2013, 106–111 (University of Huddersfield, Huddersfield, 2013). [Google Scholar]
  15. D. Walker, C. Dunn, G. Yu, M. Bibby, X. Zhenga, H. Y. Wu, H. Lia, et al., “The role of robotics in computer controlled polishing of large and small optics,” Proc. SPIE 9575, 2189203 (2015). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.