Open Access
J. Eur. Opt. Soc.-Rapid Publ.
Volume 11, 2016
Article Number 16002
Number of page(s) 6
Published online 06 February 2016
  1. T. Arnold, G. Böhm, H. Paetzelt, “Ultra-precision surface machining with reactive plasma jets,” Contrib. Plasma Phys. 54, 145–154 (2014). [NASA ADS] [CrossRef] [Google Scholar]
  2. J. Meister, and T. Arnold, “New process simulation procedure for high-rate Plasma Jet Machining,” Plasma Chem. Plasma Process 31, 91–107 (2011). [CrossRef] [Google Scholar]
  3. Q. Xin, N. Li, J. Wang, B. Wang, G. Li, F. Ding, and H. Jin, “Surface roughening of ground fused silica processed by atmospheric inductively coupled plasma,” Appl. Surf. Sci. 341, 142–148 (2015). [NASA ADS] [CrossRef] [Google Scholar]
  4. Z. Zheng, X. Zu, X. Jiang, X. Xiang, J. Huang, X. Zhou, C. Li, et al., “Effect of HF etching on the surface quality and laser-induced damage of fused silica,” Opt. Laser Technol. 44, 1039–1042 (2012). [NASA ADS] [CrossRef] [Google Scholar]
  5. P. Cormont, P. Combis, L. Gallais, C. Hecquet, L. Lamaignère, and J. L. Rullier, “Removal of scratches on fused silica optics by using a CO2 laser,” Opt. Express 21, 28272–282289 (2013). [NASA ADS] [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.