EDP Sciences logo
Submit your research paper
Search
Menu
All issues Volume 9 (2014) J. Eur. Opt. Soc.-Rapid Publ., 9 (2014) 14028 References
Open Access
Issue
J. Eur. Opt. Soc.-Rapid Publ.
Volume 9, 2014
Article Number 14028
Number of page(s) 4
DOI https://doi.org/10.2971/jeos.2014.14028
Published online 22 July 2014
  1. E. Desurvire, J. R. Simpson, and P. C. Becker, “High-gain Erbium doped traveling-wave fiber amplifier,” Opt. Lett. 12, 888–890 (1987). [NASA ADS] [CrossRef] [Google Scholar]
  2. Y. Sun, J. W. Sulhoff, A. K. Srivastava, J. L. Zyskind, T. A. Strasser, J. R. Pedrazzani, C. Wolf, et al., “80 nm ultra-wide band erbium-doped silica fiber amplifier,” Electron. Lett. 33(23), 1965–1967 (1997). [NASA ADS] [CrossRef] [Google Scholar]
  3. S. Hwang, K. W. Song, H. J. Kwon, J. Koh, Y. J. Oh, and K. Cho, “Broad band Erbium doped fiber amplifier with double-pass configuration,” IEEE Photonic. Tech. L. 13(12), 1289–1291 (2001). [CrossRef] [Google Scholar]
  4. C. H. Yeh, C. C. Lee, and S. Chi, “120 nm bandwidth erbium doped fiber amplifier in parallel configuration,” IEEE Photonic. Tech. L. 17, 1055–1077 (2004). [Google Scholar]
  5. I. Yamashita, K. Shimoura, S. Seikai, and T. Fukuoka, “Er+3 doped fiber amplifier operating at wavelength of 1.55 and 1.60 µm,” Electron. Lett. 32(12), 1102–1103 (1996). [NASA ADS] [CrossRef] [Google Scholar]
  6. J. Nilsson, S. Y. Sun, S. T. Hwang, J. M. Kim, and S. J. Kim, “Long-wavelength erbium-doped fiber amplifier gain enhanced by ASE end-reflectors,” IEEE Photonic. Tech. L. 10, 1551–1553 (1998). [CrossRef] [Google Scholar]
  7. M. A. Mahdi, and H. Ahmad, “Gain enhanced L-band Er3+-doped fiber amplifier utilizing unwanted backward ASE,” IEEE Photonic. Tech. L. 13, 1067–1069 (2001). [CrossRef] [Google Scholar]
  8. J. T. Ahn, M. Y. Jeon, and K. H. Kim, “Two stage reflective type erbium doped fiber amplifier with enhanced noise figure characteristics,” Opt. Commun. 197(3) 121–125 (2001). [CrossRef] [Google Scholar]
  9. H. Meng, W. Gao, Y. Liu, H. Zhang, C. Zhao, S. Yuan, X. Dong, et al., “The gain and noise figure improvement of reflection L-band erbium-doped fiber amplifier,” Opt. Commun. 228, 85–89 (2003). [CrossRef] [Google Scholar]
  10. H. B. Choi, J. M. Oh, and D. Lee, “Simple and efficient L-band erbiumdoped fiber amplifiers for WDM networks,” Opt. Commun. 213, 63–66 (2002). [NASA ADS] [CrossRef] [Google Scholar]
  11. L. L. Yi, L. Zhan, J. H. Ji, Q. H. Ye, and Y. X. Xia, “Improvement of gain and noise figure in double-pass L-band EDFA by incorporating a fiber Bragg grating,” IEEE Photonic. Tech. L. 16, 1005–1007 (2004). [CrossRef] [Google Scholar]
  12. S. W. Harun, and H. Ahmad, “Low noise double pass L-band erbium-doped fiber amplifier,” Opt. Laser Technol. 36(3), 245–248 (2004). [NASA ADS] [CrossRef] [Google Scholar]
  13. T. C. Liang and S. Hsu, “The L-band EDFA of high clamped gain and low noise figure implemented using fiber Bragg grating and double-pass method,” Opt. Commun. 281, 1134–1139 (2008). [NASA ADS] [CrossRef] [Google Scholar]
  14. B. Bouzid, M. B. Ali, and M. K. Abdullah, “High gain EDFA design using double pass amplification with bandpass filter,” IEEE Photonic. Tech. L. 15(9), 1195–1197 (2003). [CrossRef] [Google Scholar]
  15. S. W. Harun, N. Tamchek, P. Poopalan, and H. Ahmad, “Double-pass L-band EDFA with enhanced noise figure characteristics,” IEEE Photonic. Tech. L. 15, 1055–1057 (2003). [CrossRef] [Google Scholar]
  16. A. Altuncu, and A. Basgumus, “Gain enhancement in L-band loop EDFA through C-band signal injection,” IEEE Photonic. Tech. L. 17(7), 1402–1404 (2005). [CrossRef] [Google Scholar]
  17. M. A. Mahdi, and S. J. Sheih, “Low-noise 1480-nm pumped L-band erbium-doped fiber amplifiers incorporating a bypass isolator,” Opt. Commun. 237, 295–299 (2004). [NASA ADS] [CrossRef] [Google Scholar]
  18. R. Anthony, R. Lahiri, and S. Biswas, “Gain clamped L-band EDFA with forward-backward pumping scheme using fiber Bragg grating,” Optik 125(11), 2463–2465 (2014). [NASA ADS] [CrossRef] [Google Scholar]
  19. M. A. Mahdi, K. A. Khairi, B. Bouzid, and M. K. Abdullah, “Optimum pumping scheme of dual-stage triple pass erbium doped fiber amplifier,” IEEE Photonic. Tech. L. 16(2), 419–421 (2004). [Google Scholar]
  20. Q. Z. Xuan, H. S. Ling, Z. X. Liang, and S. Fang, “A novel 3-stage structure for a low-noise, high-gain and gain-flattened L-band erbium doped fiber amplifier,” J. Zhejiang Univ.-Sc. 5(9), 1130–1134 (2004). [CrossRef] [Google Scholar]
  21. C. F. Su, and L. Wang, “Gain enhancement of L-band EDFA by using residual pump power in a three-stage configuration,” Opt. Commun. 416, 412–416 (2007). [NASA ADS] [Google Scholar]
  22. N. Md. Yusoff, A. F. Abas, S. Hitam, and M. A. Mahdi, “Dual-stage L-band erbium-doped fiber amplifier with distributed pumping from single pump laser,” Opt. Commun. 285(6), 1383–1386 (2012). [NASA ADS] [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.