EDP Sciences logo
Submit your research paper
Search
Menu
All issues Volume 5 (2010) J. Eur. Opt. Soc.-Rapid Publ., 5 (2010) 10032s References
Open Access
Issue
J. Eur. Opt. Soc.-Rapid Publ.
Volume 5, 2010
Article Number 10032s
Number of page(s) 6
DOI https://doi.org/10.2971/jeos.2010.10032s
Published online 01 September 2010
  1. P. R. Sundararajan, “Conformational features of bisphenol-A polycarbonate” Can. J. Chemistry 63, 103–106 (1985). [CrossRef] [Google Scholar]
  2. Z. S. Geretovszky, B. Hopp, I. Bertoti, and I. W. Boyd, “Photodegradation of polycarbonate under narrow band irradiation at 172 nm” Appl. Surf. Sci. 186, 85–90 (2002). [NASA ADS] [CrossRef] [Google Scholar]
  3. C. Charitidis, A. Laskarakis, S. Kassaveties, and C. Gravalidis, “Optical and nanomechanical study of anti–scratch layer on polycarbonate lenses” Superlattice. Microstr. 36, 171–179 (2004). [NASA ADS] [CrossRef] [Google Scholar]
  4. T. Schmauder, K. D. Nauenburg, K. Kruse, and G. Ickes, “Hard coating by plasm CVD on polycarbonate for automotive and optical applications” Thin Solid Films 502, 270–274 (2006). [NASA ADS] [CrossRef] [Google Scholar]
  5. M. D. Migahed, and H. M. Zidan, “Influence of uv-irradiation on the structure and optical properties of plycarbonate fims” Curr. Appl. Phys 6, 91–96 (2006). [NASA ADS] [CrossRef] [Google Scholar]
  6. D. Bellus, P. Hrdiovic, and Z. Manasek, “Photoinitiated rearrangements in poly [2, 2-propane bis(4-phenyl earbonate)]” J. Polym. Sci. Pol. Lett. 4, 1–5 (1966). [NASA ADS] [CrossRef] [Google Scholar]
  7. A. Rivaton, “Recent advances in bisphenol-polycarbonatephotodegradation” Polym. Degrad. Stabil. 49, 163–179 (1995). [CrossRef] [Google Scholar]
  8. M. R. Adams, and A. Garton, “Surface modification of bisphenol-A polycarbonate by far-uv radiation.port I :in vacuum” Polym. Degrad. Stabil. 41, 265–273 (1993). [CrossRef] [Google Scholar]
  9. M. R. Adams, and A. Garton, “Surface modification of bispheno-A polycarbonate by far-uv radiation.partII : in air” Polym. Degrad. Stabil. 42, 145–151 (1993). [CrossRef] [Google Scholar]
  10. R. Ramani, and C. Ranganathaian, “Degradation of acrylonitrile-butadiene-styrene and polycarbonate by uv-irradiation” Polym. Degrad. Stabil. 69, 347–354 (2000). [CrossRef] [Google Scholar]
  11. M. Diepens, and D. Cijsman, “Photodegradation of bisphenol-A polycarbonate” Polym. Degrad. Stabil. 92, 397–706 (2007). [CrossRef] [Google Scholar]
  12. A. V. Zverev, I. G. Neivestnyi, N. L. Shwartz, and Z. Shyanovitskaya, “Lattice Monte Carlo model of SiOx layer” Nanotech. Rus. 3, 368–377 (2007). [Google Scholar]
  13. A. G. Erlat, B.-Ch. Wang, and R. J. Spontak, “Morphology and gas barrier of thin SiOx coatings on polycarbonate : Correlations with plasma-enhanced chemical vapor deposition conditions” J. Mater. Res 15, 704–717 (2000). [NASA ADS] [CrossRef] [Google Scholar]
  14. N. Tomozelu, “Effects of UV photon irradiation on SiOx (0 < x < 2) structural properties” Appl. Surf. Sci. 253, 376–380 (2006). [NASA ADS] [CrossRef] [Google Scholar]
  15. G. Aichmayr, D. Toet, M. Mulato, P. V. Santos, A. Spangenberg, S. Christiansen, M. Albrecht, and H. Pstrunk, “Lateral grain growth during the laser interference crystallization of A-Si” Phys. Status. Solidi A 166, 659–666 (1998). [CrossRef] [Google Scholar]
  16. A. Janotta, Y. Dikce, M. Schmidt, C. Eisele, M. Statzmann, M. Lusberg, and L. Houben, “Light-induced modification of a-siox:Laser crystallization” J. Appl. Phys. 95, 4060–4068 (2004). [CrossRef] [Google Scholar]
  17. B. J. Garrison, and R. Srinivasan, “Laser ablation of organic polymers: microscopic models photochemical and thermal processes” J. Appl. Phys. 57, 2909–2914 (2009). [Google Scholar]
  18. E. Spyratou, M. Makropoulo, and A. A. Serafetinides, “Study of visible and mid-infrared laser ablation mechanism of PMMA and intraocular lenses : experimental and theoretical results” Laser Med. Sci. 23, 179–188 (2008). [CrossRef] [Google Scholar]
  19. A. A. Serafetinides, C. D. Skordoulis, M. I. Makropoulou, and A. K. Kar, “Picoseconds and sub picosecond visible laser ablation of optically transparent polymers” Appl. Surf. Sci. 135, 276–284 (1998). [NASA ADS] [CrossRef] [Google Scholar]
  20. D. M. Bubb, S. L. Johnson, R. Belmont, K. E. Schriver, R. F. Haghland Jr, C. Antonacci, and L. S. Yeung, “Mode specific effects in resonant infrared ablation and deposition of polystyrene” Appl. Phys. A 83, 147–151 (2006). [NASA ADS] [CrossRef] [Google Scholar]
  21. B. Jang, and C. A. Wilki, “The thermal degradation of bisphenol a polycarbonate in air” Thermochim. Acta. 426, 73–84 (2005). [NASA ADS] [CrossRef] [Google Scholar]
  22. G.B. Blanchet, “Laser ablation and the unzipping of addition polymer” J. Appl. Phys. 80, 4082–4089 (1996). [CrossRef] [Google Scholar]
  23. R. Srinivasan, and B. Braren, “Ultraviolet laser ablation of organic polymers” Chem. Rev. 89, 1303–1316 (1989). [CrossRef] [Google Scholar]
  24. Y. G. Ying-Ling, and B. J. Grrison, “Photo chemical induced effect in material ejection in laser ablation” Chem. Phys. Lett. 364, 237–243 (2002). [NASA ADS] [CrossRef] [Google Scholar]
  25. U. John, and K. P. R. Nair, “Near IR overtone spectral investigations of cyclohexanol using local mode model—evidence for variation of anharmonicity with concentration due to hydrogen bonding” Spectrochimica Acta A 61, 2555–2559 (2005). [NASA ADS] [CrossRef] [Google Scholar]
  26. Sh. Shi, and W. H. Miller, “A semiclassical model for intramolecular vibrational relaxation of local mode overtone in polyatomic molecules” Theor. Chem. Acc. 68, 1–21 (1985). [CrossRef] [Google Scholar]
  27. B. R. Henry, “The local mode model and overtone spectra: a probe of molecular structure and conformation” Acc. Chem. Res. 20, 429–435 (1987). [CrossRef] [Google Scholar]
  28. V. Pander, S. K. Tripathi, and A. Kumar, “A study of optical parameters of amorphous se70 – Te30-x Ag x thin films before and after heat treatment” J. Ovonic. Res. 3, 29–38 (2007). [Google Scholar]
  29. D. Poelman, and P F. Smet, “Methods for the determination of optical constant of thin films for single transmission measurements a: critical review” J. Phys D Appl. Phys. 36, 1850–1857 (2003). [CrossRef] [Google Scholar]
  30. J. Sanchez-Gonzales, A. Diaz-Parralejo, A. Lortiz, and F. Guberzeau, “Determination of optical properties in nano structured thin films using the swan pole methode” Appl. Surf. Sci. 252, 6013–6017 (2003). [Google Scholar]
  31. I. Boerascu, M. Pereira, M. J. M. Gomes, and M. I. G. Frreira, “Structural and optical characterization of NB – doped pzt 65/35 thin films grown by Sol – gel and laser ablation techniques” J. Optoelectron Adv. M. 2, 602–609 (2000). [Google Scholar]
  32. V. Lyubin, M. Klebanor, A. Arsh, L. Shpiro, and B. Sfez, “Glassy AS40 Se25 Te35 films with high regractive inde” J. Optoelectron Adv. M. 8, 2077–2079 (2006). [Google Scholar]
  33. G. Gomes, O. M. Ozkendir, H. Kavak, and Y. Ufuktepe, “Structural, and optical properties of zinc oxide thin films prepared by spray pyrolysis methode” J. Optoelectron Adv. M. 8, 299–303 (2006). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.