Mould fabrication for polymer optics
J. Eur. Opt. Soc.-Rapid Publ., 6 (2011) 11050
Published online: 2011-11-18
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Towards the Determination of Machining Allowances and Surface Roughness of 3D-Printed Parts Subjected to Abrasive Flow Machining
Mykhailo Samoilenko, Greg Lanik and Vladimir BrailovskiJournal of Manufacturing and Materials Processing 5 (4) 111 (2021)
https://doi.org/10.3390/jmmp5040111
Steel mould surface improvement by robot fluid jet polishing and robot pad polishing for polymer optic production
Rui Almeida, Timon Ebert, Rainer Börret, et al.EPJ Web of Conferences 215 05003 (2019)
https://doi.org/10.1051/epjconf/201921505003
Geometrical shape improvement of steel moulds by robot polishing process for polymer optic replication
Rui Almeida, Rainer Börret, Mario Pohl, David K. Harrison and Anjali K. M. De SilvaProduction & Manufacturing Research 6 (1) 247 (2018)
https://doi.org/10.1080/21693277.2018.1509743
Material removal simulation for steel mould polishing
Rui Almeida, Rainer Börret, Wolfgang Rimkus, David K. Harrison and Anjali K. M. DeSilvaProduction & Manufacturing Research 5 (1) 235 (2017)
https://doi.org/10.1080/21693277.2017.1374889
Quality control of injection molded eyewear by non-contact deflectometry
A. Speck, B. Zelzer, A. Langenbucher and T. EppigJournal of the European Optical Society-Rapid Publications 9 14027 (2014)
https://doi.org/10.2971/jeos.2014.14027
Experimental investigation and analytical modelling of the effects of process parameters on material removal rate for bonnet polishing of cobalt chrome alloy
Shengyue Zeng and Liam BluntPrecision Engineering 38 (2) 348 (2014)
https://doi.org/10.1016/j.precisioneng.2013.11.005
Deflectometric analysis of high volume injection molds for production of occupational eye wear
Alexis Speck, Benedikt Zelzer, Marco Speich, et al.Zeitschrift für Medizinische Physik 23 (4) 314 (2013)
https://doi.org/10.1016/j.zemedi.2013.08.003