EDP Sciences logo
Submit your research paper
Search
Menu
All issues Volume 18 / No 1 (2022) J. Eur. Opt. Society-Rapid Publ., 18 1 (2022) 7 References
EOSAM 2021
Open Access
Issue
J. Eur. Opt. Society-Rapid Publ.
Volume 18, Number 1, 2022
EOSAM 2021
Article Number 7
Number of page(s) 10
DOI https://doi.org/10.1051/jeos/2022007
Published online 25 August 2022
  1. Di Sante R. (2015) Fibre optic sensors for structural health monitoring of aircraft composite structures: recent advances and applications, Sensors 15, 18666–18713. [CrossRef] [PubMed] [Google Scholar]
  2. Falcetelli F., Yue N., Di Sante R., Zarouchas D. (2021) Probability of detection, localization, and sizing: The evolution of reliability metrics in Structural Health Monitoring, Struct. Health Monit., 147592172110607. https://doi.org/10.1177/14759217211060780. [Google Scholar]
  3. Di Sante R., Donati L., Troiani E., Proli P. (2014) Evaluation of bending strain measurements in a composite sailboat bowsprit with embedded fibre Bragg gratings, Measurement 54, 106–117. https://doi.org/10.1016/j.measurement.2014.04.019. [NASA ADS] [CrossRef] [Google Scholar]
  4. Falcetelli F., Di Sante R., Troiani E. (2021) Strategies for embedding optical fiber sensors in additive manufacturing structures, in European Workshop on Structural Health Monitoring, Vol. 128, P. Rizzo, A. Milazzo (eds.), Springer International Publishing, Cham, pp. 362–371. https://doi.org/10.1007/978-3-030-64908-1_34. [CrossRef] [Google Scholar]
  5. Marini D., Iuliano M., Bastianini F., Bolognini G. (2018) BOTDA sensing employing a modified brillouin fiber laser probe source, J. Light. Technol. 36, 1131–1137. [NASA ADS] [CrossRef] [Google Scholar]
  6. Soto M.A., Sahu P.K., Faralli S., Sacchi G., Bolognini G., Di Pasquale F., Nebendahl B., Rueck C. (2017) High performance and highly reliable Raman-based distributed temperature sensors based on correlation-coded OTDR and multimode graded-index fibers, Proc. SPIE 66193B, 532–535. [Google Scholar]
  7. Falcetelli F., Rossi L., Di Sante R., Bolognini G. (2020) Strain transfer in surface-bonded optical fiber sensors, Sensors 20, 3100. [CrossRef] [Google Scholar]
  8. Marini D., Rossi L., Bastianini F., Bolognini G. (2018) Study of enhanced performance fiber Brillouin ring laser with wavelength-locking for sensing applications, in 20th Italian National Conference on Photonic Technologies (Fotonica 2018), CP748, 23–25 May 2018, Lecce, Italy. [Google Scholar]
  9. Rossi L., Marini D., Bastianini F., Bolognini G. (2019) Analysis of enhanced-performance fibre Brillouin ring laser for Brillouin sensing applications, Opt. Express 27, 29448–29460. [NASA ADS] [CrossRef] [Google Scholar]
  10. Bolognini G., Faralli S., Chiuchiarelli A., Falconi F., Di Pasquale F. (2006) High-power and low-RIN lasers for advanced first- and higher order Raman copumping, IEEE Photonics Technol. Lett. 18, 1591–1593. [CrossRef] [Google Scholar]
  11. Soto M.A., Taki M., Bolognini G., Di Pasquale F. (2012) Optimization of a DPP-BOTDA sensor with 25 cm spatial resolution over 60 km standard single-mode fiber using Simplex codes and optical pre-amplification, Opt. Express 20, 6860–6869. [NASA ADS] [CrossRef] [Google Scholar]
  12. Hartog A.H. (2017) An introduction to distributed optical fibre sensors, 1st edn., CRC Press. [CrossRef] [Google Scholar]
  13. Marini D., Rossi L., Bastianini F., Bolognini G. (2018) Enhanced-performance fibre Brillouin ring laser for Brillouin sensing applications, OSA Technical Digest Part F124-OFS 2018, ThE71. [Google Scholar]
  14. Bastianini F., Di Sante R., Falcetelli F., Marini D., Bolognini G. (2019) Optical fiber sensing cables for Brillouin-based distributed measurements, Sensors 19, 5172. [NASA ADS] [CrossRef] [Google Scholar]
  15. Moore E.D., McLeod R.R. (2008) Correction of sampling errors due to laser tuning rate fluctuations in swept-wavelength interferometry, Opt. Express 16, 13139–13149. [NASA ADS] [CrossRef] [Google Scholar]
  16. Gifford D.K., Kreger S.T., Sang A.K., Froggatt M.E., Duncan R.G., Wolfe M.S., Soller B.J. (2007) Swept-wavelength interferometric interrogation of fiber Rayleigh scatter for distributed sensing applications. Proceedings of the Fiber Optic Sensors and Applications V 6770, 67700F. [NASA ADS] [CrossRef] [Google Scholar]
  17. Soller B.J., Wolfe M.S., Froggat M.E. (2005) Polarization resolved measurement of Rayleigh backscatter in fiber-optic components, in Proceedings of the OFC Technical Digest; NWD3. [Google Scholar]
  18. Rao Y.J. (1998) Fiber Bragg grating sensors: principles and applications, in Optical Fiber Sensor Technology, K.T.V. Grattan, B.T. Meggitt (eds.), Springer, Boston, MA, USA, pp. 355–379. [CrossRef] [Google Scholar]
  19. LUNA Technologies (2009) Optical backscatter reflectometer user guide. [Google Scholar]
  20. LUNA Technologies (2016) ODiSI-B sensor strain gage factor uncertainty, Revision 2. [Google Scholar]
  21. Li D., Li H., Ren L., Song G. (2006) Strain transferring analysis of fiber Bragg grating sensors, Opt. Eng. 45, 024402. [NASA ADS] [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.