Open Access
| Issue |
J. Eur. Opt. Soc.-Rapid Publ.
Volume 10, 2015
|
|
|---|---|---|
| Article Number | 15058 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.2971/jeos.2015.15058 | |
| Published online | 16 December 2015 | |
- D. Erickson, and D. Li, “Integrated microfluidic devices,” Anal. Chim. Acta 507, 11–26 (2004). [NASA ADS] [CrossRef] [Google Scholar]
- K. Sato, A. Hibara, M. Tokeshi, H. Hisamoto, and T. Kitamori, “Microchip-based chemical and biochemical analysis systems,” Adv. Drug Deliver. Rev. 55, 379–391 (2003). [CrossRef] [Google Scholar]
- P. N. Floriano, N. Christodoulides, D. Romanovicz, B. Bernard, G. W. Simmons, M. Cavell, and J. T. McDevitt, “Membrane-based on-line optical analysis system for rapid detection of bacteria and spores,” Biosens. Bioelectron. 20, 2079–2088 (2005). [CrossRef] [Google Scholar]
- H. Mohamed, A. P. Russo, D. H. Szarowski, E. McDonnell, L. A. Lepak, M. G. Spencer, D. L. Martin, et al., “Development and characterization of on-chip biopolymer membranes,” J. Chromatogr. A 1111, 214–219 (2006). [CrossRef] [Google Scholar]
- J. P. Brody, T. D. Osborn, F. K. Forster, and P. Yager, “A planar microfabricated fluid filter,” Sensor Actuator. A-Phys. 54, 704–708 (1996). [NASA ADS] [CrossRef] [Google Scholar]
- B. He, L. Tan, and F. Regnier, “Microfabricated filters for microfluidic analytical systems,” Anal. Chem. 71, 1464–1468 (1999). [CrossRef] [Google Scholar]
- G. L. Lettieri, A. Dodge, G. Boer, N. F. de Rooij, and E. Verpoorte, “A novel microfluidic concept for bioanalysis using freely moving beads trapped in recirculating flows,” Lab Chip 3, 34–39 (2003). [CrossRef] [Google Scholar]
- F. Svec, E. C. Peters, D. Sykora, C. Yu, and J. M. J. Frechet, “Monolithic stationary phases for capillary electrochromatography based on synthetic polymers: designs and applications,” J. High Res. Chromatogr. 23, 3–18 (2000). [CrossRef] [Google Scholar]
- R. W. Tjerkstra, J. G. E. Gardeniers, J. J. Kelly, and A. Van den Berg, “Multi-Walled Microchannels: Free-Standing Porous Silicon Membranes for Use in μTAS,” J. Microelectromech. S. 9, 495–501 (2000). [CrossRef] [Google Scholar]
- J. Khandurina, S. C. Jacobson, L. C. Waters, R. S. Foote, and J. M. Ramsey, “Microfabricated Porous Membrane Structure for Sample Concentration and Electrophoretic Analysis,” Anal. Chem. 71, 1815–1819 (1999). [CrossRef] [Google Scholar]
- S.-Y. Cheng, S. Heilman, M. Wasserman, S. Archer, M. L. Shuler, and M. Wu, “A hydrogel-based microfluidic device for the studies of directed cell migration,” Roy. Soc. Ch. 7, 763–769 (2007). [Google Scholar]
- S. Klatt, M. Allerdißen, R. Körbitz, B. Voit, K.-F. Arndt, and A. Richter, “Hydrogel-based microfluidic systems,” Adv. Sci. Tech. 81, 90–95 (2013). [Google Scholar]
- D. Psaltis, S. R. Quake, and C. Yang, “Developing optofluidic technology through the fusion of microfluidics and optics,” Nature 442, 381–386 (2006). [CrossRef] [PubMed] [Google Scholar]
- G. C. Randall, and P. S. Doyle, “Permeation-driven flow in poly(dimethylsiloxane) microfluidic devices,” P. Natl. Acad. Sci. USA 102, 10813–10818 (2005). [NASA ADS] [CrossRef] [Google Scholar]
- D. Bartolo, G. Degré, P. Nghe, and V. Studer, “Microfluidic Stickers,” Lab Chip 8, 274–279 (2008). [CrossRef] [Google Scholar]
- J. C. McDonald, D. C. Duffy, J. R. Anderson, D. T. Chiu, H. Wu, O. J. A. Schueller, and G. M. Whitesides, “Fabrication of microfluidic systems in poly (dimethylsiloxane),” Electrophoresis 21, 27–40 (2000). [CrossRef] [Google Scholar]
- J. S. Paustian, R. N. Azevedo, S.-T. B. Lundin, M. J. Gilkey, and T. M. Squires, “Microfluidic Microdialysis: Spatiotemporal Control over Solution Microenvironments Using Integrated Hydrogel Membrane Microwindows,” Phys. Rev. X 3, 041010 (2013). [NASA ADS] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.