EDP Sciences logo
Submit your research paper
Search
Menu
All issues Volume 10 (2015) J. Eur. Opt. Soc.-Rapid Publ., 10 (2015) 15015 References
Open Access
Issue
J. Eur. Opt. Soc.-Rapid Publ.
Volume 10, 2015
Article Number 15015
Number of page(s) 5
DOI https://doi.org/10.2971/jeos.2015.15015
Published online 12 March 2015
  1. A. E. A. Mohammed, and A. N. Z. Rashed, “Ultra wide band (UWB) of optical fiber Raman amplifiers in advanced optical communication networks,” J. Media Commun. Stud. 1 56–72 (2009). [Google Scholar]
  2. S. W. Harun, N. Tamchek, P. Poopalan, and H. Ahmad, “Doublepass L-band EDFA with enhanced noise figure characteristics,” IEEE Photon. Technol. Lett. 15 1055–1057 (2003). [NASA ADS] [CrossRef] [Google Scholar]
  3. S. W. Harun, N. K. Saat, and H. Ahmad, “An efficient S-band erbiumdoped fiber amplifier using double-pass configuration,” IEICE Electron. Expr. 2 182–185 (2005). [CrossRef] [Google Scholar]
  4. X. Wang, Q. Nie, T. Xu, X. Shen, S. Dai, and N. Gai, “Tm3+-doped tellurite glass with Yb3+ energy sensitized for broadband amplifier at 1400-1700 nm bands,” J. Rare Earth. 26 907–911 (2008). [CrossRef] [Google Scholar]
  5. A. J. G. Ellison, J. E. Dickinson, D. E. Goforth, D. L. Harris, J. T. Kohli, J. D. Minelly, B. N. Samson, et al., “Hybrid erbium silicate conventional-band fiber amplifier with ultra-low gain ripple,” in Proceedings to Optical Amplifiers and their Applications, NW2 (Optical Society of America, Nara, 1999). [Google Scholar]
  6. P. F. Wysocki, N. Park, and D. DiGiovanni, “Dual-stage erbiumdoped, erbium/ytterbium-codoped fiber amplifier with up to +26 dBm output power and a 17 nm flat spectrum,” Opt. Lett. 21 1744–1746 (1996). [NASA ADS] [CrossRef] [Google Scholar]
  7. E. Desurvire, D. Bayart, B. Desthieux, and S. Bigo, Erbium-doped fiber amplifiers, device and system developments (John Wiley & Sons Inc., New York, 2002). [Google Scholar]
  8. M. Kakui, T. Kashiwada, K. Nakazato, M. Onishi, C. Fukuda, M. Shigematsu, and M. Nishimura, “Design optimization of hybrid erbium-doped fiber amplifiers for WDM transmission systems,” Opt. Fiber Technol. 3 123–133 (1997). [NASA ADS] [CrossRef] [Google Scholar]
  9. J. Nilsson, and B. Jaskorzynska, “Alternating cascade of spectrally different erbium-doped fiber amplifiers for link-loss-insensitive long-haul WDM transmission,” J. Lightwave Technol. 17 434–444 (1999). [NASA ADS] [CrossRef] [Google Scholar]
  10. A. Bjarklev, “Hybrid erbium-doped fiber for gain flattened operation,” Opt. Fiber Technol. 3 72–76 (1997). [CrossRef] [Google Scholar]
  11. S. W. Harun, and H. Ahmad, “Gain clamped two-stage doublepass L-band EDFA with a single fibre Bragg grating,” Chinese Phys. Lett. 21 1954–1957 (2004). [NASA ADS] [CrossRef] [Google Scholar]
  12. L. Bigot, G. Le Cocq, and Y. Quiquempois, “Few-mode erbiumdoped fiber amplifiers: a review,” J. Lightwave Technol. (2015) article in press. [Google Scholar]
  13. X. S. Cheng, R. Parvizi, H. Ahmad, and S. W. Harun, “Wide-band bismuth-based erbium-doped fiber amplifier with a flat-gain characteristic,” IEEE Photon. J. 1 259–264 (2009). [NASA ADS] [CrossRef] [Google Scholar]
  14. R. Schermer, W. Berglund, C. Ford, R. Ramberg, and A. Gopinath, “Optical amplification at 1534 nm in erbium-doped zirconia waveguides,” IEEE J. Quantum Elect. 39 154–159 (2003). [NASA ADS] [CrossRef] [Google Scholar]
  15. H. Ahmad, K. Thambiratnam, M. C. Paul, A. Z. Zulkifli, Z. A. Ghani, and S. W. Harun, “Fabrication and application of zirconia-erbium doped fibers,” Opt. Mater. Express 2 1690–1701 (2012). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.