Open Access
Issue
J. Eur. Opt. Soc.-Rapid Publ.
Volume 9, 2014
Article Number 14038
Number of page(s) 7
DOI https://doi.org/10.2971/jeos.2014.14038
Published online 05 September 2014
  1. M. B. Grieb, H. J. Christ, and B. Plege, “Thermomechanical fatigue of cast aluminium alloys for cylinder head applications – experimental characterization and life prediction,” Procedia Eng. 2, 1767–1776 (2010). [Google Scholar]
  2. T. Beck, D. Löhe, J. Luft, and I. Henne, “Damage mechanisms of cast Al–Si–Mg alloys under superimposed thermal–mechanical fatigue and high-cycle fatigue loading,” Mater. Sci. Eng A Struct. 468–470, 184–192 (2007). [CrossRef] [Google Scholar]
  3. T. Takahashi, and K. Sasaki, “Low cycle thermal fatigue of aluminum alloy cylinder head in consideration of changing metrology microstructure,” Procedia Eng. 2, 767–776 (2010). [CrossRef] [Google Scholar]
  4. W. M. Zhao, and W. Z. Zhang, “Study on thermal fatigue life prediction of cylinder head,” Materials Science and Information Technology 433–440, 3–8 (2012). [Google Scholar]
  5. M. Wu, and J. Campbell, “Thermal fatigue in diesel engine cylinder head castings,” Tran. Amer. F. 106, 485–496 (1998). [Google Scholar]
  6. Y. C. Zhou, S. G. Long, and Y. W. Liu, “Thermal failure mechanism and failure threshold of SiC particle reinforced metal matrix composites induced by laser beam,” Mech. Mater. 35, 1003–1020 (2003). [NASA ADS] [CrossRef] [Google Scholar]
  7. H.-W. Song, G. Yu, J.-S. Tan, L. Zhou, and X.-L. Yu, “Thermal fatigue on pistons induced by shaped high power laser. Part I: Experimental study of transient temperature field and temperature oscillation,” Int. J. Heat Mass Tran. 51, 757–767 (2008). [NASA ADS] [CrossRef] [Google Scholar]
  8. H.-W. Song, G. Yu, A. F. H. Kaplan, J.-S. Tan, and X.-L. Yu, “Thermal fatigue on pistons induced by shaped high power laser. Part II: Design of spatial intensity distribution via numerical simulation,” Int. J. Heat Mass Tran. 51, 768–778 (2008). [NASA ADS] [CrossRef] [Google Scholar]
  9. H.-W. Song, S.-X. Li, L. Zhang, G. Yu, L. Zhou, and J.-S. Tan, “Numerical simulation of thermal loading produced by shaped high power laser onto engine parts,” Appl. Therm. Eng. 30, 553–560 (2010). [CrossRef] [Google Scholar]
  10. K. Fuse, T. Hirai, T. Ushiro, T. Okada, K. Kurisu, and K. Ebata, “Design and performance of multilevel phase fan-out diffractive optical elements for laser materials processing,” J. Laser Appl. 15, 246–254 (2003). [NASA ADS] [CrossRef] [Google Scholar]
  11. B. Q. Xu, Z. H. Shen, J. Lu, X. W. Ni, and S. Y. Zhang, “Numerical simulation of laser-induced transient temperature field in film substrate system by finite element method,” Int. J. Heat Mass Tran. 46, 4963–4968 (2003). [NASA ADS] [CrossRef] [Google Scholar]
  12. H. G. Woo, and H. S. Cho, “Three-dimensional temperature distribution in laser surface hardening processes,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 213, 695–712 (1999). [CrossRef] [Google Scholar]
  13. W. M. Steen, and J. Mazumder, Mathematical modelling of laser/material interactions (European office of Aerospace Research and Development, Final report 1–19, 1983). [Google Scholar]
  14. T. J. Suleski, and D. C. O’Shea, “Gray-scale masks for diffractive-optics fabrication: 1. Commercial slide imagers,” Appl. Optics 34, 7507–7517 (1995). [CrossRef] [Google Scholar]
  15. M. Schaus, and M. Pohl, “Nd-YAG-Laser simulated thermal shock and thermal fatigue behaviour of railroad steel,” Metallurgy 52, 464–470 (1998). [Google Scholar]
  16. D. M. Zhu, D. S. Fox, R. A. Miller, L. J. Ghosn, and S. Kalluri, “Effect of surface impulsive thermal loads on fatigue behavior of constant volume propulsion engine combustor materials,” Surf. Coat. Technol. 188–189, 13–19 (2004). [CrossRef] [Google Scholar]
  17. L.-P. Guo, F.-S. Liu, C.-Y. Wang, and W. Du, “Temperature measurement and numerical study on improving cooling of cylinder head for high power-density,” Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines) 30, 462–468 (2012). [Google Scholar]
  18. V. Gupta, and J. Srinivasan, Heat and mass transfer (Tata McGraw-Hill Publishing Co. Ltd., New Delhi, 1978). [Google Scholar]
  19. S.-Z. Nie, G. Yu, X.-L. He, C.-Y. Zheng, W.-J. Ning, and S.-X. Li, “Verification of model parameters used in laser thermal fatigue test on cylinder,” Guangxue Xuebao/Acta Optica Sinica 31, s100518 (2011) in Chinese. [CrossRef] [Google Scholar]
  20. S.-Z. Nie, J. Yu, Z.-W. Fan, W.-Q. Ge, Y. Liu, and X. Zhang, “Research on laser beam shaping technology using diffractive optics,” Guangxue Xuebao/Acta Optica Sinica 33, s105001 (2013) in Chinese. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.