Removal of Mid Spatial-Frequency Features in Mirror Segments
J. Eur. Opt. Soc.-Rapid Publ., 6 (2011) 11044
Published online: 2011-09-02
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Review on high efficiency and high precision compliant polishing method
Huiming Feng, Linbin Huang, Peizhi Huang, et al.The International Journal of Advanced Manufacturing Technology 132 (5-6) 2091 (2024)
https://doi.org/10.1007/s00170-024-13388-z
Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces
Zhaohao He, Kuo Hai, Kailong Li, et al.Micromachines 15 (5) 654 (2024)
https://doi.org/10.3390/mi15050654
Application and development of bonnet polishing technology
Pengfei Zhang, Zhenzhong Wang, Xuepeng Huang and Hao ZhangOptical Engineering 63 (10) (2024)
https://doi.org/10.1117/1.OE.63.10.100901
Modeling and in-depth analysis of the mid-spatial-frequency error influenced by actual contact pressure distribution in sub-aperture polishing
Lanya Zhang, Songlin Wan, Hanjie Li, et al.Optics Express 31 (9) 14414 (2023)
https://doi.org/10.1364/OE.487195
Mid-high-frequency error suppression of small optical aspheric molds
Jiarong Zhang, Han Wang, Shaomu Zhuo, et al.Applied Optics 62 (11) 2766 (2023)
https://doi.org/10.1364/AO.485517
Mid-spatial frequency error generation mechanisms and prevention strategies for the grinding process
Mario Pohl, Olga Kukso, Rainer Boerret and Rolf RascherJournal of the European Optical Society-Rapid Publications 16 (1) (2020)
https://doi.org/10.1186/s41476-020-00140-9
Rigid aspheric smoothing tool for mid-spatial frequency errors on aspheric or freeform optical surfaces
Guoyu Yu, Lunzhe Wu, Xing Su, et al.Journal of the European Optical Society-Rapid Publications 15 (1) (2019)
https://doi.org/10.1186/s41476-019-0114-3
Effects of kinematics and groove parameters on the mid-spatial frequency error of optics induced during full aperture polishing
Ruiqing Xie, Shijie Zhao, Defeng Liao, et al.Precision Engineering 57 176 (2019)
https://doi.org/10.1016/j.precisioneng.2019.04.002
Combined processing chain for freeform optics based on atmospheric pressure plasma processing and bonnet polishing
Xing Su, Peng Ji, Kan Liu, et al.Optics Express 27 (13) 17979 (2019)
https://doi.org/10.1364/OE.27.017979
Simulation and analysis of optical imaging systems including real freeform components
Johannes Stock, Matthias Beier, Johannes Hartung, Sebastian Merx and Herbert GrossAdvanced Optical Technologies 8 (2) 111 (2019)
https://doi.org/10.1515/aot-2018-0065
Fundamental steps toward next-generation intelligent automatic process in a faster and cost-effective chain for processing optical surfaces
Hsing-Yu Wu, David Walker and Guoyu YuOptics Express 27 (15) 21856 (2019)
https://doi.org/10.1364/OE.27.021856
Characterization of the tool influence function in a dual-axis wheel polishing process to achieve high material removal rates
Ange Lu, Tan Jin, Zongfu Guo, et al.Precision Engineering 52 276 (2018)
https://doi.org/10.1016/j.precisioneng.2018.01.003
A computational study of the influence of surface roughness on material strength
Alison McMillan, Rhys Jones, Daren Peng and Gregory A. ChechkinMeccanica 53 (9) 2411 (2018)
https://doi.org/10.1007/s11012-018-0830-6
Modelling and simulation of mid-spatial-frequency error generation in CCOS
Bo Zhong, Hongzhong Huang, Xianhua Chen, Wenhui Deng and Jian WangJournal of the European Optical Society-Rapid Publications 14 (1) (2018)
https://doi.org/10.1186/s41476-018-0075-y
Development of multi-pitch tool path in computer-controlled optical surfacing processes
Jing Hou, Defeng Liao and Hongxiang WangJournal of the European Optical Society-Rapid Publications 13 (1) (2017)
https://doi.org/10.1186/s41476-017-0050-z
Simulation of mid-spatials from the grinding process
M. Pohl and R. BörretJournal of the European Optical Society-Rapid Publications 11 16010 (2016)
https://doi.org/10.1051/jeos.2016.16010
10009 1000904 (2016)
https://doi.org/10.1117/12.2235536
Effect of the tool influence function shape of the semirigid bonnet to the tool path ripple error
Jing Lin, Chunjin Wang, Hui Ye, Wei Yang and Yinbiao GuoOptical Engineering 54 (11) 115104 (2015)
https://doi.org/10.1117/1.OE.54.11.115104
Pose-varied Multi-axis Optical Finishing Systems
Haobo ChengPose-varied Multi-axis Optical Finishing Systems 27 (2015)
https://doi.org/10.1007/978-3-662-44182-4_2
Optimization of parameters for bonnet polishing based on the minimum residual error method
Chunjin Wang, Wei Yang, Shiwei Ye, et al.Optical Engineering 53 (7) 075108 (2014)
https://doi.org/10.1117/1.OE.53.7.075108
Restraint of tool path ripple based on the optimization of tool step size for sub-aperture deterministic polishing
C. Wang, W. Yang, S. Ye, et al.The International Journal of Advanced Manufacturing Technology 75 (9-12) 1431 (2014)
https://doi.org/10.1007/s00170-014-6223-7
295 (2014)
https://doi.org/10.1109/ISOT.2014.79
Mid-Spatial Frequency Error (PSD-2) of optics induced during CCOS and full-aperture polishing
D. Liao, Z. Yuan, C. Tang, R. Xie and X. ChenJournal of the European Optical Society-Rapid Publications 8 13031 (2013)
https://doi.org/10.2971/jeos.2013.13031
Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surface
David Walker, Guoyu Yu, Hongyu Li, et al.Optics Express 20 (18) 19787 (2012)
https://doi.org/10.1364/OE.20.019787