Polishing of optical media by dielectric barrier discharge inert gas plasma at atmospheric pressure
J. Eur. Opt. Soc.-Rapid Publ., 8 (2013) 13081
Published online: 2013-12-27
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Plasma generation and mitigation of sub-surface defects in fused silica optics via advanced plasma treatment
Hari Narayan Singh Yadav and Manas DasJournal of Optics (2025)
https://doi.org/10.1007/s12596-025-02484-2
Feasibility study on the suitability of dielectric barrier discharge plasma treatment of desert sand for concrete production purposes
Yorick FENNER, Martin BELLMANN, Andreas TÜMMEL and Christoph GERHARDPlasma Science and Technology 27 (1) 015504 (2025)
https://doi.org/10.1088/2058-6272/ad94cd
Advances in finishing of optical complex substrates: A comprehensive review
Hari Narayan Singh Yadav and Manas DasOptics & Laser Technology 176 110938 (2024)
https://doi.org/10.1016/j.optlastec.2024.110938
Development and Performance Evolution of Medium-Pressure He/SF6/O2-Based Plasma and Wet Chemical Etching Process for Surface Modification of Fused Silica
Hari Narayan Singh Yadav and Manas DasPlasma Chemistry and Plasma Processing 44 (2) 1083 (2024)
https://doi.org/10.1007/s11090-024-10447-x
Evaluation of plasma parameters’ impact on MRR and surface roughness in plasma polishing of fused silica: An investigation of surface characterization
Hari Narayan Singh Yadav and Manas DasVacuum 225 113263 (2024)
https://doi.org/10.1016/j.vacuum.2024.113263
Parametric optimisation of plasma polishing process using response surface methodology
Hari Narayan Singh Yadav and Manas DasSurface Engineering 39 (2) 204 (2023)
https://doi.org/10.1080/02670844.2023.2206183
Experimental and numerical study of the CO2 laser-polishing edge effect on silica surface
Yusuf DoganThe International Journal of Advanced Manufacturing Technology 128 (3-4) 1483 (2023)
https://doi.org/10.1007/s00170-023-12015-7
Homogenization and reduction of the roughness of polished sapphire surfaces via inert gas plasma post-processing
Christoph Gerhard and Daniel TascheOptical Materials Express 12 (11) 4354 (2022)
https://doi.org/10.1364/OME.465969
Total reflection X-ray fluorescence analysis with a glass substrate treated with a He atmospheric pressure plasma jet
Kouichi Tsuji, Tsugufumi Matsuyama, Tsuneo Fukuda, et al.Journal of Analytical Atomic Spectrometry 36 (9) 1873 (2021)
https://doi.org/10.1039/D1JA00164G
Atmospheric Pressure Dielectric Barrier Discharge Plasma-Enhanced Optical Contact Bonding of Coated Glass Surfaces
Josephine Neumann, Stephan Brückner, Wolfgang Viöl and Christoph GerhardApplied Sciences 11 (15) 6755 (2021)
https://doi.org/10.3390/app11156755
15 (2020)
https://doi.org/10.1117/12.2564862
Increasing the Laser-Induced Damage Threshold of Optical Components by Atmospheric Pressure Plasma Surface Finishing
Christoph Gerhard, Marco Stappenbeck, Daniel Tasche, O. Fähnle and A. VasdekisEPJ Web of Conferences 215 01003 (2019)
https://doi.org/10.1051/epjconf/201921501003
Development of a non-contact plasma processing technique to mitigate chemical network defects of fused silica with life enhancement of He-Ne laser device
D. Sam Dayala Dev, Enni Krishna and Manas DasOptics & Laser Technology 113 289 (2019)
https://doi.org/10.1016/j.optlastec.2018.12.028
Improving the Adhesiveness of Cemented Glass Components by DBD Plasma Pre-Treatment at Atmospheric Pressure
Christoph Gerhard, Gerrit Mielke, Stephan Brückner and Olaf WermannApplied Sciences 9 (24) 5511 (2019)
https://doi.org/10.3390/app9245511
Impact of the Polishing Suspension Concentration on Laser Damage of Classically Manufactured and Plasma Post-Processed Zinc Crown Glass Surfaces
Christoph Gerhard and Marco StappenbeckApplied Sciences 8 (9) 1556 (2018)
https://doi.org/10.3390/app8091556
Atmospheric pressure plasma-assisted femtosecond laser engraving of aluminium
Christoph Gerhard, Thomas Gimpel, Daniel Tasche, et al.Journal of Physics D: Applied Physics 51 (17) 175201 (2018)
https://doi.org/10.1088/1361-6463/aab6e6
Precision Product-Process Design and Optimization
D. Sam Dayala Dev, Enni Krishna and Manas DasLecture Notes on Multidisciplinary Industrial Engineering, Precision Product-Process Design and Optimization 313 (2018)
https://doi.org/10.1007/978-981-10-8767-7_12
Increase in nanosecond laser-induced damage threshold of sapphire windows by means of direct dielectric barrier discharge plasma treatment
Christoph Gerhard, Daniel Tasche, Norbert Munser and Helene DyckOptics Letters 42 (1) 49 (2017)
https://doi.org/10.1364/OL.42.000049
Impact of assisting atmospheric pressure plasma on the formation of micro- and nanoparticles during picosecond-laser ablation of titanium
Stefan Grottker, Wolfgang Viöl and Christoph GerhardApplied Optics 56 (12) 3365 (2017)
https://doi.org/10.1364/AO.56.003365
Applicability of random sequential adsorption algorithm for simulation of surface plasma polishing kinetics
Stanislav Minárik and Dušan VaňaApplied Surface Science 355 364 (2015)
https://doi.org/10.1016/j.apsusc.2015.07.107
Sequential Atmospheric Pressure Plasma-Assisted Laser Ablation of Photovoltaic Cover Glass for Improved Contour Accuracy
Christoph Gerhard, Maximilian Dammann, Stephan Wieneke and Wolfgang ViölMicromachines 5 (3) 408 (2014)
https://doi.org/10.3390/mi5030408
Impact of the thermal lens effect in atmospheric pressure DBD-plasma columns on coaxially guided laser beams
J Hoffmeister, S Brückner, C Gerhard, S Wieneke and W ViölPlasma Sources Science and Technology 23 (6) 064008 (2014)
https://doi.org/10.1088/0963-0252/23/6/064008