Modelling and measurement of polishing tool influence functions for edge control
J. Eur. Opt. Soc.-Rapid Publ., 6 (2011) 11048
Published online: 2011-11-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Modeling of tool influence function for the abrasive cloth flap wheel and optimization of polishing path spacing and feed rate
Yun Zhang, Xiaojun Lin and Yaoyao ShiThe International Journal of Advanced Manufacturing Technology 130 (1-2) 683 (2024)
https://doi.org/10.1007/s00170-023-12737-8
Mechanism of a deterministic sponge figuring processing (SFP) in Ni–P surface formation considering the robustness of the tool influence function: modeling and experimental investigation
YuHao Li, Guo Li, JiaDai Xue, Fei Ding and Bo WangThe International Journal of Advanced Manufacturing Technology 130 (11-12) 5563 (2024)
https://doi.org/10.1007/s00170-024-13008-w
Study of Modified Offset Trajectory for Bonnet Polishing Based on Lifting Bonnet Method
Shujing Sha, Shaohang Ma, Shanqiang Han, et al.Micromachines 14 (12) 2210 (2023)
https://doi.org/10.3390/mi14122210
Review on mid-spatial frequency error suppression in optical components manufacturing
Yonghong Deng, Xi Hou, Bincheng Li, Jia Wang and Yun ZhangThe International Journal of Advanced Manufacturing Technology 126 (11-12) 4827 (2023)
https://doi.org/10.1007/s00170-023-11408-y
Super hard and brittle material removal mechanism in fixed abrasive lapping: Theory and modeling
Jiapeng Chen and Yanan PengTribology International 184 108493 (2023)
https://doi.org/10.1016/j.triboint.2023.108493
Towards understanding and restraining the mechanical relaxation effect in polishing silicon carbide with a detachable bonnet tool
Yifan Zhang, Jingbo Feng, Yuyang Zhao, Mengqi Rao and Yuehong YinInternational Journal of Mechanical Sciences 246 107962 (2023)
https://doi.org/10.1016/j.ijmecsci.2022.107962
Edge roll-off suppression method in double-sided lapping with fixed abrasives
Bo Pan, Renke Kang, Xiaoguang Guo, Nan Yu and Jiang GuoApplied Optics 61 (1) 279 (2022)
https://doi.org/10.1364/AO.446652
Modeling and experimentation of dynamic material removal characteristics in dual-axis wheel polishing
Ange Lu, Ke Guo, Tan Jin and Qifeng LiuInternational Journal of Mechanical Sciences 151 523 (2019)
https://doi.org/10.1016/j.ijmecsci.2018.12.010
Modeling and prediction of surface topography and surface roughness in dual-axis wheel polishing of optical glass
Ange Lu, Tan Jin, Qifeng Liu, et al.International Journal of Machine Tools and Manufacture 137 13 (2019)
https://doi.org/10.1016/j.ijmachtools.2018.10.001
Simulation and experimental study on the concave influence function in high efficiency bonnet polishing for large aperture optics
Tao Jiang, Judong Liu, Jun Pi, Zhilong Xu and Zhihuang ShenThe International Journal of Advanced Manufacturing Technology 97 (5-8) 2431 (2018)
https://doi.org/10.1007/s00170-018-2068-9
Modelling and simulation of mid-spatial-frequency error generation in CCOS
Bo Zhong, Hongzhong Huang, Xianhua Chen, Wenhui Deng and Jian WangJournal of the European Optical Society-Rapid Publications 14 (1) (2018)
https://doi.org/10.1186/s41476-018-0075-y
Insight into aspheric misfit with hard tools: mapping the island of low mid-spatial frequencies
David Walker, Wu Hsing-Yu, Guoyu Yu, et al.Applied Optics 56 (36) 9925 (2017)
https://doi.org/10.1364/AO.56.009925
Edge effect correction using ion beam figuring
Bing Yang, Xuhui Xie, Furen Li and Lin ZhouApplied Optics 56 (32) 8950 (2017)
https://doi.org/10.1364/AO.56.008950
Virtual pivot alignment method and its influence to profile error in bonnet polishing
Junkang Guo, Anthony Beaucamp and Soichi IbarakiInternational Journal of Machine Tools and Manufacture 122 18 (2017)
https://doi.org/10.1016/j.ijmachtools.2017.06.001
Modeling of edge tool influence functions for computer controlled optical surfacing process
Ho-Seok Nam, Gi-Chul Kim, Hak-Sung Kim, Hyug-Gyo Rhee and Young-Sik GhimThe International Journal of Advanced Manufacturing Technology 83 (5-8) 911 (2016)
https://doi.org/10.1007/s00170-015-7633-x
Modeling of edge effect in subaperture tool influence functions of computer controlled optical surfacing
Songlin Wan, Xiangchao Zhang, Xiaoying He and Min XuApplied Optics 55 (36) 10223 (2016)
https://doi.org/10.1364/AO.55.010223
Edge effect modeling and experiments on active lap processing
Haitao Liu, Fan Wu, Zhige Zeng, Bin Fan and Yongjian WanOptics Express 22 (9) 10761 (2014)
https://doi.org/10.1364/OE.22.010761
Toward Single-Mode Active Crystal Fibers for Next-Generation High-Power Fiber Devices
Chien-Chih Lai, Wan-Ting Gao, Duc Huy Nguyen, et al.ACS Applied Materials & Interfaces 6 (16) 13928 (2014)
https://doi.org/10.1021/am503330m
Research on the Optimization of the Bonnet Polishing Tool
Chun Jin Wang, Wei Yang, Zhen Zhong Wang, Ri Pan and Yin Biao GuoApplied Mechanics and Materials 278-280 406 (2013)
https://doi.org/10.4028/www.scientific.net/AMM.278-280.406
Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surface
David Walker, Guoyu Yu, Hongyu Li, et al.Optics Express 20 (18) 19787 (2012)
https://doi.org/10.1364/OE.20.019787