EDP Sciences logo
Submit your research paper
Search
Menu
All issues J. Eur. Opt. Soc.-Rapid Publ., 14 1 (2018) 3 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Diesel Adulteration Detection with a Machine Learning-Enhanced Laser Sensor Approach

Bachar Mourched, Tariq AlZoubi and Sabahudin Vrtagic
Processes 12 (4) 798 (2024)
https://doi.org/10.3390/pr12040798

Miniaturized Gas Chromatographic Nose for On-Site Adulteration Detection

Mustahsin Chowdhury, Shaunak Manurkar, Varun Rege, et al.
IEEE Transactions on Instrumentation and Measurement 72 1 (2023)
https://doi.org/10.1109/TIM.2023.3273674

A Highly Sensitive Liquid–Filled Microstructured Fiber SPR Sensor for Refractive Index and Temperature Measurement

Tulika Khanikar and Vinod Kumar Singh
Plasmonics 18 (1) 95 (2023)
https://doi.org/10.1007/s11468-022-01744-2

Butyl acrylate/TiO2–copolymer hybrid one-dimensional photonic crystal–based colorimetric sensor for detection of C6–C16 n-alkanes of kerosene in adulterated diesel

Tae Gyu Hwang, Minju Jeong, Jongnam Park, Yu Jin Jung, Do-Hoon Hwang, Hoyoul Kong, Dong Woo Cho and Jong Mok Park
Chemical Engineering Journal 468 143614 (2023)
https://doi.org/10.1016/j.cej.2023.143614

Fuel production by thermal and catalytic co-pyrolysis of polyethylene terephthalate and polyethylene using waste iron as catalyst

S. Malik, H. Gulab, K. Hussain, M. Hussain and M. A. Haleem
International Journal of Environmental Science and Technology 19 (5) 4019 (2022)
https://doi.org/10.1007/s13762-021-03381-4

Recent Advances in Manufacturing, Automation, Design and Energy Technologies

S. Hemachandiran, G. Aghila and R. Siddharth
Lecture Notes in Mechanical Engineering, Recent Advances in Manufacturing, Automation, Design and Energy Technologies 415 (2022)
https://doi.org/10.1007/978-981-16-4222-7_48

An insight into different microplastic detection methods

A. Baruah, A. Sharma, S. Sharma and R. Nagraik
International Journal of Environmental Science and Technology 19 (6) 5721 (2022)
https://doi.org/10.1007/s13762-021-03384-1

Towards the Development of Portable and In Situ Optical Devices for Detection of Micro-and Nanoplastics in Water: A Review on the Current Status

Benjamin O. Asamoah, Emilia Uurasjärvi, Jukka Räty, Arto Koistinen, Matthieu Roussey and Kai-Erik Peiponen
Polymers 13 (5) 730 (2021)
https://doi.org/10.3390/polym13050730

Determining the Composition of 100 Nano-Liter Fuel Mixture in a Silicon Micro-Cuvette Using Ultraviolet Absorption Spectroscopy

Alakananda Das, Sushanta K. Mitra and Anirban Bhattacharyya
Journal of Microelectromechanical Systems 30 (2) 315 (2021)
https://doi.org/10.1109/JMEMS.2020.3047938

Wavelength-dependent excess permittivity as indicator of kerosene in diesel oil

Boniphace Kanyathare and Kai-Erik Peiponen
Applied Optics 57 (12) 2997 (2018)
https://doi.org/10.1364/AO.57.002997

Table model and portable optical sensors for the monitoring of time-dependent liquid spreading over rough surfaces

Benjamin Osae Asamoah, Boniphace Kanyathare and Kai-Erik Peiponen
Journal of the European Optical Society-Rapid Publications 14 (1) (2018)
https://doi.org/10.1186/s41476-018-0093-9

Hand-Held Refractometer-Based Measurement and Excess Permittivity Analysis Method for Detection of Diesel Oils Adulterated by Kerosene in Field Conditions

Boniphace Kanyathare and Kai-Erik Peiponen
Sensors 18 (5) 1551 (2018)
https://doi.org/10.3390/s18051551