Polishing of optical media by dielectric barrier discharge inert gas plasma at atmospheric pressure
J. Eur. Opt. Soc.-Rapid Publ., 8 (2013) 13081
Published online: 2013-12-27
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Development and Performance Evolution of Medium-Pressure He/SF6/O2-Based Plasma and Wet Chemical Etching Process for Surface Modification of Fused Silica
Hari Narayan Singh Yadav and Manas DasPlasma Chemistry and Plasma Processing 44 (2) 1083 (2024)
https://doi.org/10.1007/s11090-024-10447-x
Advances in finishing of optical complex substrates: A comprehensive review
Hari Narayan Singh Yadav and Manas DasOptics & Laser Technology 176 110938 (2024)
https://doi.org/10.1016/j.optlastec.2024.110938
Evaluation of plasma parameters’ impact on MRR and surface roughness in plasma polishing of fused silica: An investigation of surface characterization
Hari Narayan Singh Yadav and Manas DasVacuum 225 113263 (2024)
https://doi.org/10.1016/j.vacuum.2024.113263
Parametric optimisation of plasma polishing process using response surface methodology
Hari Narayan Singh Yadav and Manas DasSurface Engineering 39 (2) 204 (2023)
https://doi.org/10.1080/02670844.2023.2206183
Experimental and numerical study of the CO2 laser-polishing edge effect on silica surface
Yusuf DoganThe International Journal of Advanced Manufacturing Technology 128 (3-4) 1483 (2023)
https://doi.org/10.1007/s00170-023-12015-7
Homogenization and reduction of the roughness of polished sapphire surfaces via inert gas plasma post-processing
Christoph Gerhard and Daniel TascheOptical Materials Express 12 (11) 4354 (2022)
https://doi.org/10.1364/OME.465969
Atmospheric Pressure Dielectric Barrier Discharge Plasma-Enhanced Optical Contact Bonding of Coated Glass Surfaces
Josephine Neumann, Stephan Brückner, Wolfgang Viöl and Christoph GerhardApplied Sciences 11 (15) 6755 (2021)
https://doi.org/10.3390/app11156755
Total reflection X-ray fluorescence analysis with a glass substrate treated with a He atmospheric pressure plasma jet
Kouichi Tsuji, Tsugufumi Matsuyama, Tsuneo Fukuda, et al.Journal of Analytical Atomic Spectrometry 36 (9) 1873 (2021)
https://doi.org/10.1039/D1JA00164G
15 (2020)
https://doi.org/10.1117/12.2564862
Improving the Adhesiveness of Cemented Glass Components by DBD Plasma Pre-Treatment at Atmospheric Pressure
Christoph Gerhard, Gerrit Mielke, Stephan Brückner and Olaf WermannApplied Sciences 9 (24) 5511 (2019)
https://doi.org/10.3390/app9245511
Development of a non-contact plasma processing technique to mitigate chemical network defects of fused silica with life enhancement of He-Ne laser device
D. Sam Dayala Dev, Enni Krishna and Manas DasOptics & Laser Technology 113 289 (2019)
https://doi.org/10.1016/j.optlastec.2018.12.028
Increasing the Laser-Induced Damage Threshold of Optical Components by Atmospheric Pressure Plasma Surface Finishing
Christoph Gerhard, Marco Stappenbeck, Daniel Tasche, O. Fähnle and A. VasdekisEPJ Web of Conferences 215 01003 (2019)
https://doi.org/10.1051/epjconf/201921501003
Atmospheric pressure plasma-assisted femtosecond laser engraving of aluminium
Christoph Gerhard, Thomas Gimpel, Daniel Tasche, et al.Journal of Physics D: Applied Physics 51 (17) 175201 (2018)
https://doi.org/10.1088/1361-6463/aab6e6
Impact of the Polishing Suspension Concentration on Laser Damage of Classically Manufactured and Plasma Post-Processed Zinc Crown Glass Surfaces
Christoph Gerhard and Marco StappenbeckApplied Sciences 8 (9) 1556 (2018)
https://doi.org/10.3390/app8091556
Precision Product-Process Design and Optimization
D. Sam Dayala Dev, Enni Krishna and Manas DasLecture Notes on Multidisciplinary Industrial Engineering, Precision Product-Process Design and Optimization 313 (2018)
https://doi.org/10.1007/978-981-10-8767-7_12
Increase in nanosecond laser-induced damage threshold of sapphire windows by means of direct dielectric barrier discharge plasma treatment
Christoph Gerhard, Daniel Tasche, Norbert Munser and Helene DyckOptics Letters 42 (1) 49 (2017)
https://doi.org/10.1364/OL.42.000049
Impact of assisting atmospheric pressure plasma on the formation of micro- and nanoparticles during picosecond-laser ablation of titanium
Stefan Grottker, Wolfgang Viöl and Christoph GerhardApplied Optics 56 (12) 3365 (2017)
https://doi.org/10.1364/AO.56.003365
Applicability of random sequential adsorption algorithm for simulation of surface plasma polishing kinetics
Stanislav Minárik and Dušan VaňaApplied Surface Science 355 364 (2015)
https://doi.org/10.1016/j.apsusc.2015.07.107
Impact of the thermal lens effect in atmospheric pressure DBD-plasma columns on coaxially guided laser beams
J Hoffmeister, S Brückner, C Gerhard, S Wieneke and W ViölPlasma Sources Science and Technology 23 (6) 064008 (2014)
https://doi.org/10.1088/0963-0252/23/6/064008
Sequential Atmospheric Pressure Plasma-Assisted Laser Ablation of Photovoltaic Cover Glass for Improved Contour Accuracy
Christoph Gerhard, Maximilian Dammann, Stephan Wieneke and Wolfgang ViölMicromachines 5 (3) 408 (2014)
https://doi.org/10.3390/mi5030408