EDP Sciences logo
Submit your research paper
Search
Menu
All issues J. Eur. Opt. Soc.-Rapid Publ., 6 (2011) 11048 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Mechanism of a deterministic sponge figuring processing (SFP) in Ni–P surface formation considering the robustness of the tool influence function: modeling and experimental investigation

YuHao Li, Guo Li, JiaDai Xue, Fei Ding and Bo Wang
The International Journal of Advanced Manufacturing Technology 130 (11-12) 5563 (2024)
https://doi.org/10.1007/s00170-024-13008-w

Modeling of tool influence function for the abrasive cloth flap wheel and optimization of polishing path spacing and feed rate

Yun Zhang, Xiaojun Lin and Yaoyao Shi
The International Journal of Advanced Manufacturing Technology 130 (1-2) 683 (2024)
https://doi.org/10.1007/s00170-023-12737-8

Study of Modified Offset Trajectory for Bonnet Polishing Based on Lifting Bonnet Method

Shujing Sha, Shaohang Ma, Shanqiang Han, et al.
Micromachines 14 (12) 2210 (2023)
https://doi.org/10.3390/mi14122210

Towards understanding and restraining the mechanical relaxation effect in polishing silicon carbide with a detachable bonnet tool

Yifan Zhang, Jingbo Feng, Yuyang Zhao, Mengqi Rao and Yuehong Yin
International Journal of Mechanical Sciences 246 107962 (2023)
https://doi.org/10.1016/j.ijmecsci.2022.107962

Review on mid-spatial frequency error suppression in optical components manufacturing

Yonghong Deng, Xi Hou, Bincheng Li, Jia Wang and Yun Zhang
The International Journal of Advanced Manufacturing Technology 126 (11-12) 4827 (2023)
https://doi.org/10.1007/s00170-023-11408-y

Edge roll-off suppression method in double-sided lapping with fixed abrasives

Bo Pan, Renke Kang, Xiaoguang Guo, Nan Yu and Jiang Guo
Applied Optics 61 (1) 279 (2022)
https://doi.org/10.1364/AO.446652

Modeling and prediction of surface topography and surface roughness in dual-axis wheel polishing of optical glass

Ange Lu, Tan Jin, Qifeng Liu, et al.
International Journal of Machine Tools and Manufacture 137 13 (2019)
https://doi.org/10.1016/j.ijmachtools.2018.10.001

Modeling and experimentation of dynamic material removal characteristics in dual-axis wheel polishing

Ange Lu, Ke Guo, Tan Jin and Qifeng Liu
International Journal of Mechanical Sciences 151 523 (2019)
https://doi.org/10.1016/j.ijmecsci.2018.12.010

Modelling and simulation of mid-spatial-frequency error generation in CCOS

Bo Zhong, Hongzhong Huang, Xianhua Chen, Wenhui Deng and Jian Wang
Journal of the European Optical Society-Rapid Publications 14 (1) (2018)
https://doi.org/10.1186/s41476-018-0075-y

Simulation and experimental study on the concave influence function in high efficiency bonnet polishing for large aperture optics

Tao Jiang, Judong Liu, Jun Pi, Zhilong Xu and Zhihuang Shen
The International Journal of Advanced Manufacturing Technology 97 (5-8) 2431 (2018)
https://doi.org/10.1007/s00170-018-2068-9

Insight into aspheric misfit with hard tools: mapping the island of low mid-spatial frequencies

David Walker, Wu Hsing-Yu, Guoyu Yu, et al.
Applied Optics 56 (36) 9925 (2017)
https://doi.org/10.1364/AO.56.009925

Virtual pivot alignment method and its influence to profile error in bonnet polishing

Junkang Guo, Anthony Beaucamp and Soichi Ibaraki
International Journal of Machine Tools and Manufacture 122 18 (2017)
https://doi.org/10.1016/j.ijmachtools.2017.06.001

Modeling of edge tool influence functions for computer controlled optical surfacing process

Ho-Seok Nam, Gi-Chul Kim, Hak-Sung Kim, Hyug-Gyo Rhee and Young-Sik Ghim
The International Journal of Advanced Manufacturing Technology 83 (5-8) 911 (2016)
https://doi.org/10.1007/s00170-015-7633-x

Modeling of edge effect in subaperture tool influence functions of computer controlled optical surfacing

Songlin Wan, Xiangchao Zhang, Xiaoying He and Min Xu
Applied Optics 55 (36) 10223 (2016)
https://doi.org/10.1364/AO.55.010223

Toward Single-Mode Active Crystal Fibers for Next-Generation High-Power Fiber Devices

Chien-Chih Lai, Wan-Ting Gao, Duc Huy Nguyen, et al.
ACS Applied Materials & Interfaces 6 (16) 13928 (2014)
https://doi.org/10.1021/am503330m

Edge effect modeling and experiments on active lap processing

Haitao Liu, Fan Wu, Zhige Zeng, Bin Fan and Yongjian Wan
Optics Express 22 (9) 10761 (2014)
https://doi.org/10.1364/OE.22.010761

Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surface

David Walker, Guoyu Yu, Hongyu Li, et al.
Optics Express 20 (18) 19787 (2012)
https://doi.org/10.1364/OE.20.019787