EDP Sciences logo
Submit your research paper
Search
Menu
All issues Volume 22 / No 1 (2026) J. Eur. Opt. Society-Rapid Publ., 22 1 (2026) 51 References
Open Access
Issue
J. Eur. Opt. Society-Rapid Publ.
Volume 22, Number 1, 2026
Article Number 51
Number of page(s) 12
DOI https://doi.org/10.1051/jeos/2026047
Published online 09 June 2026
  1. Bliedtner J, Gräfe G, in Optiktechnologie: Grundlagen-Verfahren-Anwendungen-Beispiele, 2nd edn. (Carl Hanser Verlag, Leipzig, 2010). [Google Scholar]
  2. Yin J-F, Bai Q, Zhang B, Methods for detection of subsurface damage: a review, Chin. J. Mech. Eng. 31, 1 (2018). https://doi.org/10.1186/s10033-018-0229-2. [Google Scholar]
  3. Cui Y, et al., A review of subsurface damage detection methods for optical components, AIP Adv. 13, 6 (2023). https://doi.org/10.1063/5.0151498. [Google Scholar]
  4. Cao H, et al., Advances in subsurface defect detection techniques for fused silica optical components: A literature review, J. Mater. Res. Technol. 35 (2025). https://doi.org/10.1016/j.jmrt.2025.01.045. [Google Scholar]
  5. Passi V et al., Anisotropic vapor HF etching of silicon dioxide for Si microstructure release, Microelectron. Eng. 95, (2012). https://doi.org/10.1016/j.mee.2012.01.005. [Google Scholar]
  6. Liu T et al., Hydrofluoric acid-based etching effect on surface pit, crack, and scratch and laser damage site of fused silica optics, Opt. Exp. 27, 8 (2019). https://doi.org/10.1364/OE.27.010705. [Google Scholar]
  7. Shu Y, Study on etching process of fused silica with concentrated HF, Optik 178, (2019). https://doi.org/10.1016/j.ijleo.2018.10.011. [Google Scholar]
  8. Sun L et al., KOH-based shallow etching for exposing subsurface damage and increasing laser damage resistance of fused silica optical surface, Opt. Mater. 108, (2020). https://doi.org/10.1016/j.optmat.2020.110249. [Google Scholar]
  9. Frank S et al., Enhanced imaging of subsurface damage in optical glass SF6 with optical coherence tomography using KOH wet etching, EPJ Web Conf. 309, (2024). https://doi.org/10.1051/epjconf/202430903010. [Google Scholar]
  10. Wong L et al., The effect of HF/NH4F etching on the morphology of surface fractures on fused silica, J. Non-Cryst. Solids 355, 13 (2009). https://doi.org/10.1016/j.jnoncrysol.2009.01.037. [Google Scholar]
  11. Katardjiev IV, Carter G, Nobes MJ, The modelling of surface evolution during growth and erosion, Int. J. Numer. Model. 3, 2 (2005). https://doi.org/10.1002/jnm.1660030209. [Google Scholar]
  12. Da Costa Fernandes B et al., Understanding the effect of wet etching on damage resistance of surface scratches, Sci. Rep. 8, 1 (2018). https://doi.org/10.1038/s41598-018-19716-0. [Google Scholar]
  13. Krishna E, Sreelakshmy K, Medha Lal R, Comparative study on the effects of dry and wet etching on surface characteristics of fused silica optics, Opt. Mater. 162, 116809 (2025). https://doi.org/10.1016/j.optmat.2025.116809. [Google Scholar]
  14. Jiao P et al., Morphology evolution of Vickers indentation in fused silica glass etched by atmospheric pressure plasma jet, Ceram. Int. 48, 21 (2022). https://doi.org/10.1016/j.ceramint.2022.07.069. [Google Scholar]
  15. Meister J, Arnold T, New process simulation procedure for high-rate plasma jet machining, Plasma Chem. Plasma Process. 31, 1 (2010). https://doi.org/10.1007/s11090-010-9267-y. [Google Scholar]
  16. Arnold T, Böhm G, Paetzelt H, Ultra-precision surface machining with reactive plasma jets, Contrib. Plasma Phys. 54, 2 (2014). https://doi.org/10.1002/ctpp.201310058. [Google Scholar]
  17. Müller, H et al., Atmospheric plasma jet processing for figure error correction of an optical element made from S-BSL7, J. Eur. Opt. Soc. Rapid Publ. 18, 1 (2022). https://doi.org/10.1051/jeos/2022003. [Google Scholar]
  18. Ehrhardt M et al., Transfer of micron pattern with reactive atmospheric plasma jets into fused silica, Appl. Surf. Sci. Adv. 23, (2024). https://doi.org/10.1016/j.apsadv.2024.100636. [Google Scholar]
  19. Arnold T, Boehm G, Paetzelt H, New freeform manufacturing chains based on atmospheric plasma jet machining, J. Eur. Opt. Soc.: Rapid Publ. 11, 16002 (2016). https://doi.org/10.2971/jeos.2016.16002. [Google Scholar]
  20. Vickers hardness test procedure (Web pages, cited 2026 30-01). https://www.tec-science.com/material-science/material-testing/vickers-hardness-test/. [Google Scholar]
  21. Diamond cone for Rockwell hardness testing (Web pages, cited 2026 30-01). https://www.tec-science.com/material-science/material-testing/rockwell-hardness-test/. [Google Scholar]
  22. Müller H, Arnold T. in Proceedings of the Twelfth European Seminar on Precision Optics Manufacturing, Teisnach (Germany), 2025, edited by G. Fütterer, C. Wünsche, O.W. Fähnle, H. Thieß, A. Haberl (Proc. SPIE), 1378906, https://doi.org/10.1117/12.3074295. [Google Scholar]
  23. Zakiev, I et al., Glass fracture during micro-scratching, Surfaces 3, 2 (2020). https://doi.org/10.3390/surfaces3020016. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.